Skip to Content
  1. All products
  2. Marble Adhesive / Marble Glue (Stone Mastic)(3 Star) – 1 Litre
  3. All products
Pricelist: Customer Price Pricelist
Pricelist: Customer Price Pricelist
Marble Adhesive / Marble Glue (Stone Mastic)(3 Star) – 1 Litre

Marble Adhesive / Marble Glue (Stone Mastic)(3 Star) – 1 Litre

The daily workhorse for professional stone fabricators. Engineered for the Malaysian climate, this high-viscosity polyester adhesive delivers a rock-solid bond with a rapid cure time. Perfect for mitre joints, laminations, and chip repairs on Marble and Artificial Stone. Stop waiting for glue to dry-bond it, grind it, and ship it.

RM 28.00 RM 28.00

  • Colour Options
  • Variant
  • Packaging
Contact Us
Variant: 1 Litre

Key Features (Why Buy This?)

  • 🚀 Rapid Cure Technology: Hardens in 15–25 minutes (at 30°C). Get your polishing pads on the stone faster.
  • 💎 High Polish Retention: Cures hard and takes a high-gloss shine that matches natural stone surfaces perfectly. Won't "gum up" your diamond pads.
  • 💪 Vertical Grip (Knife-Grade): Thixotropic formula won't sag or drip on vertical edges or 45° mitre joints.
  • ❄️ "Tropical" Hardener Included: Comes with a reinforced hardener paste designed to withstand Malaysia's heat without separating.

Technical Specifications

Specification Detail
Base Material Unsaturated Polyester Resin
Consistency Knife Grade (Paste)
Color Options Transparent (Clear) / White / Black
Volume 1.0 Liter (approx. 1.2kg Gross Weight)
Cure Time 3-6 mins (Gel time) / 20 mins (Grindable)
Shelf Life 12 Months (Store in cool, dry place)

Applications

✅ Laminating Edges: Bonding two slabs for thick profiles.

✅ Miter Joints: 45-degree apron assembly.

✅ Installation: Spot-fixing stone pieces (Note: Not for structural anchoring).

How to Use (For Best Results)

  1. Clean: Ensure stone surface is rough, dry, and free of dust or oil.
  2. Mix: Add 2-3% hardener by weight to the glue (approx. a pea-sized amount for a golf-ball sized dollop of glue).
  3. Apply: Mix thoroughly until colour is uniform and apply immediately.
  4. Finish: Do not move the stone for 15 minutes. Ready to sand/polish after 30 minutes.

💡 Pro Tip from Apex Stone Tools:

"Malaysian weather is HOT. On days above 32°C, reduce the hardener slightly to prevent the glue from snapping (hardening) too fast before you can spread it. Always keep the hardener tube cap tight to prevent leakage!"

⚠️ First-Time User Guide: Mastering the Hardener Ratio

If this is your first time using this adhesive, expect a learning curve. The hardener-to-glue ratio is critical and may require some trial and error to dial in perfectly for your workshop conditions.

🎯 Goal: Control the working time so the adhesive reaches a grindable state in 10–15 minutes after application—fast enough to keep production moving, but not so fast that it hardens mid-spread.

  • Start Conservative: Begin with 2% hardener by weight. If the glue takes longer than 20 minutes to harden, increase slightly.
  • Adjust for Temperature: On cooler days (below 28°C), you may need 3% hardener. On scorching days (above 32°C), drop to 1.5% to avoid flash curing.
  • Test Small Batches: Mix a small amount (50g glue + appropriate hardener) and time how long it takes to gel. Take notes. Consistency is everything.

💬 "The best fabricators keep a logbook of their hardener ratios for different seasons. Once you find your sweet spot, you'll never look back."