Skip to Content
  1. All products
  2. VD Stone Mirror Glaze II (Liquid Polish) – 500ml
  3. All products
Pricelist: Customer Price Pricelist
Pricelist: Customer Price Pricelist
VD Stone Mirror Glaze II (Liquid Polish) – 500ml

VD Stone Mirror Glaze II (Liquid Polish) – 500ml

The final secret weapon for a "mirror-like" finish. VD Mirror Glaze is a high-performance liquid polishing compound designed to boost the gloss level of Granite, Marble, and Artificial Stone after the standard polishing process. It enhances color depth and corrects minor micro-scratches or "haze" left by buffing pads.
RM 80.00 RM 80.00

  • Bottle
Contact Us
Bottle: 500ml

📝 How to Use (Step-by-Step Guide)

Step 1: Preparation

  • Ensure the stone surface has been polished up to #3000 grit or a Buffing pad. The surface must be clean, dry, and free of dust or oil.

  • Shake the bottle well before opening. The active nano-particles settle at the bottom.

Step 2: Application

  • Pour a small amount (approx. 10-20ml per square meter) directly onto the center of the stone slab.

  • Tip: Do not flood the surface. A little goes a long way.

Step 3: Buffing (The Critical Step)

  • Use a variable speed grinder with a White Nylon Pad or Lambswool Bonnet.

  • Spread: Start at a Low Speed (600-900 RPM) to spread the liquid evenly over the area.

  • Burnish: Once spread, increase to High Speed (1500-2000 RPM). Apply downward pressure.

  • The Reaction: You need to generate HEAT. The friction heat helps the chemical penetrate the pores and harden into a glass-like shell. Keep buffing until the stone is completely dry and the liquid disappears.

Step 4: Inspection

  • Wipe off any dusty residue with a dry microfiber cloth.

  • Check the reflection. If you want a deeper "wet look," repeat Steps 2 & 3.

⚠️ Important Warnings

  • Do Not Use on Floors: This product creates a very smooth, slippery surface. Recommended for Countertops, Wall Cladding, and Table Tops only.

  • Not a Sealer: This is a surface enhancer.

  • Keep Dry: Do not wash the surface with water for at least 1 hour after application to allow the glaze to cure fully.

💡 Pro Tip for Fabricators:

"If you have a dark Black Granite (like Shanxi Black) that looks slightly grey or cloudy after polishing, use this Glaze with a Black Buffing Pad. It will restore the deep black color and hide the grey haze immediately."